SCIA Engineer output: steel frame on plinth walls and a foundation slab

The output (10 sheets) of the SCIA Engineer calculation that is compared with StruCla on the comparison page: model, combinations, nodes, members and loads, and the results for the load case self weight (internal forces and deflections of the members, the steel check, the 2D internal forces and the reinforcement of the plates). Project name, client, plant, licence holder, author and logo have been removed (the white area at the top of each sheet and the project table on sheet 1).

SCIA Engineer output of a steel frame on plinth walls and a foundation slab, sheet 1 of 10 — Sheet 1 of 10

SCIA Engineer output of a steel frame on plinth walls and a foundation slab, sheet 2 of 10 — Sheet 2 of 10

SCIA Engineer output of a steel frame on plinth walls and a foundation slab, sheet 3 of 10 — Sheet 3 of 10

SCIA Engineer output of a steel frame on plinth walls and a foundation slab, sheet 4 of 10 — Sheet 4 of 10

SCIA Engineer output of a steel frame on plinth walls and a foundation slab, sheet 5 of 10 — Sheet 5 of 10

SCIA Engineer output of a steel frame on plinth walls and a foundation slab, sheet 6 of 10 — Sheet 6 of 10

SCIA Engineer output of a steel frame on plinth walls and a foundation slab, sheet 7 of 10 — Sheet 7 of 10

SCIA Engineer output of a steel frame on plinth walls and a foundation slab, sheet 8 of 10 — Sheet 8 of 10

SCIA Engineer output of a steel frame on plinth walls and a foundation slab, sheet 9 of 10 — Sheet 9 of 10

SCIA Engineer output of a steel frame on plinth walls and a foundation slab, sheet 10 of 10 — Sheet 10 of 10